Father and Son Charged in $500,000 Stolen-Car Scheme

Shopping for a used vehicle on Facebook Marketplace always carries an inherent level of risk, but buyers in Pennsylvania recently encountered something far worse than undisclosed mechanical issues. According to the state’s Attorney General, a father-and-son duo has been officially charged with running a highly lucrative chop shop operation out of Lehigh County. Jermaine Quinones Sr., 42, and his son Jermaine Quinones Jr., 18, allegedly sold nearly $500,000 worth of stolen vehicles directly to unsuspecting buyers across the popular social media platform.

The investigation revealed that the duo successfully offloaded at least 12 stolen vehicles throughout 2025 and 2026 by utilizing a sophisticated title-washing scheme. By acquiring legitimate Vehicle Identification Numbers (VINs) from other cars and generating counterfeit paperwork, the suspects disguised the stolen vehicles perfectly. This fraudulent documentation allowed the stolen cars to seamlessly pass through state titling and registration systems without ever triggering an alarm, leaving innocent buyers entirely unaware of the massive legal headache parked in their driveways.

Cole Attisha

Moving High-End Inventory

Unlike traditional chop shops that primarily deal in older, easily dismantled commuter cars for parts, this Pennsylvania operation specifically targeted highly desirable, late-model inventory. Based on the official release, authorities identified several high-value vehicles recovered in the sting, including a 2026 Infiniti QX60 valued at roughly $67,500, a nearly new Acura Integra worth $35,950, and two late-model Ford Mustangs. The sheer scale and audacity of this criminal enterprise are highly reminiscent of recent high-profile automotive scams, such as the massive federal case where a Texas fraudster will lose more than 90 cars bought with fraud money.

Following a lengthy investigation, law enforcement arrested Quinones Sr. in early October with cash bail set at $450,000, while his son was apprehended shortly after with a $100,000 bail. Both men are now facing a severe list of felony charges, including theft by deception, washing vehicle titles, and widespread insurance fraud. If convicted on these charges, the pair could each face a maximum sentence of 20 years in prison.

Ford

The Danger to Used Car Buyers

This case highlights a terrifying reality for modern used car shoppers. Because the counterfeit documentation was so thoroughly forged, even diligent buyers who paid for standard VIN history reports were completely fooled into thinking they were purchasing legitimate vehicles.

Unfortunately, fraudulent vehicle sales are a persistent threat across the entire automotive industry, extending far beyond the unregulated landscape of Facebook Marketplace. Consumers must remain incredibly vigilant, as even established brick-and-mortar retailers occasionally face severe legal scrutiny. In recent months alone, we have seen a Nissan dealer sued over used car with conflicting titles and mileage, while a prominent Utah dealer is accused of selling $2 million in totaled cars to unsuspecting customers. The ultimate lesson is to thoroughly inspect every single document and verify all physical VIN tags match before ever handing over cash.

Winter Weather Advisory Issued for Up to 12 Inches of Snow and 50 MPH Gusts This Weekend

Up to 12 inches of snow is forecast along the highest peaks this weekend under winter weather advisories from the National Weather Service, with gusts as high as 50 mph and the heaviest snow expected late Saturday night. Forecasters are telling drivers to plan on slippery roads, and for anyone heading over the passes the bigger question is likely to be which level of chain control goes up and whether their vehicle is exempt from it.

Snow Totals By Elevation

Four advisories from three offices run from 11 a.m. ET Saturday to 10 a.m. ET Sunday, a window that takes in the switch from daylight saving time early Sunday morning.

The NWS Reno advisories split the eastern side of the range by elevation. In the Greater Lake Tahoe Area, including Truckee, South Lake Tahoe, Tahoe City, Incline Village, Stateline, Glenbrook and Markleeville, snow is limited to elevations above 7,000 feet, with 2 to 5 inches and up to 9 inches along the highest peaks. Gusts there could reach 50 mph. Mono County, covering Mammoth Lakes, Lee Vining, Bridgeport and Coleville, gets 3 to 6 inches above 8,000 feet and up to 12 inches on the highest peaks, with gusts to 45 mph that could bring down tree branches.

NWS Sacramento covers the Northern Sierra above 7,000 feet, including Highway 50 and Interstate 80, with up to 8 inches and up to 12 inches at the highest peaks, plus up to 2 inches possible down to 6,000 feet. Snow levels start at 7,000 to 8,000 feet on Saturday and lower to 6,000 to 7,000 feet Saturday night, with the heaviest snow from Saturday evening into Sunday. Carson Pass, Kingvale and Donner Peak are inside the advisory.

Farther south on the western slope, NWS Hanford expects 4 to 7 inches between 7,500 and 9,500 feet and up to 11 inches above 9,500 feet across Yosemite outside the valley, Kings Canyon and Sequoia national parks, the upper San Joaquin River and Kaiser to Rodgers Ridge. Tuolumne Meadows, Wawona, Shaver Lake, Huntington Lake, Lodgepole and Giant Forest all sit inside it.

How California Chain Controls Work

Caltrans posts chain controls in three levels, and the difference between them decides whether a car keeps moving or stops at the side of the road. Under R-1, chains are required on everything except passenger vehicles and light-duty trucks under 6,000 pounds gross weight that have snow tires on at least two drive wheels. R-2 drops that exemption for most cars and leaves it only for four-wheel-drive and all-wheel-drive vehicles with snow-tread tires on all four wheels. R-3 requires chains or traction devices on every vehicle, with no exceptions.

For Caltrans, a snow tire is identified by its sidewall, which must carry MS, M/S, M+S or the words “mud and snow.” Many all-season tires on new cars carry an M+S marking, so a crossover that left the dealer on its original tires may already qualify under R-1 and, with all-wheel drive, under R-2.

AWD Still Has To Carry Chains

Related: Do You Really Need Snow Chains This Year? Here’s When They’re Worth It

The exemption does not mean leaving the chains at home. Caltrans requires four-wheel-drive and all-wheel-drive vehicles to carry traction devices in chain control areas, and vehicles running on snow tires under R-1 have to carry chains as well. Drivers who skip chains when they are required can be cited by the California Highway Patrol and fined.

Once chains go on, the speed limit drops to 25 or 30 mph, which stretches the time it takes to cross a pass in a weekend storm. Caltrans posts current chain controls on QuickMap, and the advisories point drivers to 511 for road conditions in the state they are calling from.

Inside Yosemite, Tioga Road and Glacier Point Road are listed as open on the park’s current conditions page, last updated Oct. 23, with no overnight parking along either road or in their lots. The park’s road line at 209-372-0200 carries the latest status.

Honda’s 1,300-HP Hybrid Passport Baja Spec Takes Aim at Trophy Truck Racing

Honda apparently looked at the massive V8s powering today’s fastest desert trucks and decided to bring something smaller. Much smaller. Its answer is a 2.4-liter twin-turbocharged V6, an 800-volt hybrid system, and more than 1,300 horsepower. That’s an awful lot of unpleasantness to unleash on a patch of dirt, and I’m rather excited about it.

The Honda Passport Baja Spec is a purpose-built race truck developed by Honda Racing Corporation USA and Mason Motorsports. Honda says it will become the first hybrid-powered entry in the SCORE World Desert Championship’s top Trophy Truck class. Two-time Baja 1000 winner Bryce Menzies will drive through a partnership with Menzies Motorsports, with its competition debut scheduled for the 2027 Baja 500, June 2–6.

Before anybody starts calling dealerships, this isn’t a Passport TrailSport with an aggressive accessories package. Beneath the carbon-fiber body is a mid-engine, all-wheel-drive racing chassis. The Passport connection is primarily its identity and styling. Your neighborhood Honda service department can probably relax.


View the 2 images of this gallery on the
original article

Powertrain and performance

The all-aluminum V6 is based on the engine powering Acura’s ARX-06 GTP endurance racer, which has demonstrated its durability with victories at Daytona and Sebring. HRC US developed both the engine and its accompanying hybrid system in Southern California. Honda says their combined output surpasses the massive naturally aspirated 9-liter V8s used in leading Trophy Trucks.

Think about that: a 2.4-liter engine, working with electric assistance, taking on V8s approaching four times its displacement. That doesn’t automatically make it better, but it certainly makes the engineering conversation more interesting.


View the 2 images of this gallery on the
original article

The battery uses previous-generation Formula 1-style pouch cells housed in a lightweight carbon-fiber enclosure. HRC engineers designed and manufactured the pack in-house, with assembly and validation taking place in a dedicated clean room at the company’s Santa Clarita headquarters. From a clean room to Baja: that battery is in for a fairly dramatic change of scenery.

Honda hasn’t disclosed battery capacity, electric-motor output, or combined torque. We also don’t have a curb weight. Until those numbers arrive, the headline remains 1,300-plus horsepower supported by an 800-volt hybrid architecture.

Getting that power into the dirt

Mason Motorsports supplies a Masomatic twin-angled-drive five-speed transmission mounted ahead of the engine. Its unusual AWD transaxle arrangement sends torque through two rear driveshafts to angled high-pinion spiral bevel gears at the rear wheels, replacing a conventional rear ring-and-pinion arrangement. The design increases clearance and permits camber and toe adjustments.

Up front, a Mason differential distributes torque through portal gearsets at the hubs, helping maximize ground clearance and optimize drivetrain geometry. This is considerably more involved than pressing the “Sand” button in a crossover and hoping somebody remembered a shovel.

Related: I Drove The 2026 Land Rover Defender 130 X, and It’s My New Dream SUV For Family and Adventure

The electronics are equally ambitious. Honda specifies dual-axle brake-by-wire, adaptive traction control, and what it calls AI power deployment. Proprietary HRC software coordinates powertrain, chassis, and energy management, allowing the team to tailor responses to the driver, course, and changing conditions. The challenge will be making all that sophistication dependable when the truck is being repeatedly hammered.


View the 2 images of this gallery on the
original article

Chassis, suspension, and aerodynamics

The foundation is Mason’s Gen 2 AWD chassis, with an HRC-specific rear frame section accommodating the hybrid powertrain. A 145-gallon carbon-Kevlar safety fuel cell sits centrally within the cab structure, helping minimize changes in weight distribution as fuel is consumed. Batteries, fluid tanks, and other fixed-mass components are positioned to support consistent balance.

Long-travel suspension uses two FOX Racing shocks at each corner, while Toyo tires handle contact with whatever Baja throws underneath. Suspension-travel figures haven’t been released.

HRC also used computational fluid dynamics to develop the carbon-fiber body. Deep channels behind the front wheels manage airflow, while cab tunneling directs air toward a low-mounted rear cooler. High-mounted exhaust outlets behind the cockpit incorporate aerodynamic fins. The objective is improved stability, cooling, and efficiency. Apparently, simply looking intimidating wasn’t enough homework.

Final thoughts

Honda’s Baja history deserves context. Its 22 overall Baja 1000 victories came on motorcycles. Separately, its four-wheel racing program has accumulated 17 Baja class victories since 2015, including four Baja 1000 wins and five Baja 500 triumphs. This truck represents a bigger swing: targeting an overall Baja 1000 victory.

The Passport Baja Spec makes its first public appearance at SEMA, November 3–6, before heading toward competition in 2027. Impressive engineering makes a compelling introduction, but Baja has a habit of turning ambitious machinery into expensive scenery.

Still, an endurance-racing-derived hybrid powertrain, Mason chassis, and Bryce Menzies behind the wheel make a persuasive combination. I’m rooting for it. Preferably from somewhere with a clear view and a substantial distance between me and those tires.

Related: Genesis GV70 vs. Maserati Grecale: Sensible Luxury Meets Italian Temptation

Rivian’s Electric Van Outsold R1S SUV and R1T Pickup Combined

Rivian has come a long way since 2021, when production of its first road-going model, the R1T electric pickup, began at its Normal, Illinois plant.

In five years, the company has grown from an EV startup into an established EV maker that currently sells four products: the R1T pickup, the R1S three-row full-size SUV, the new R2 midsize SUV, and the often overlooked Rivian Commercial Van (RCV). Mind you, the latter is only available to fleet and business buyers for the time being.

The Rivian RCV Is America’s Best-Selling Electric Van by Far

Rivian

Now, which of these models do you think sold best during the third quarter of 2026? Like me, you might be tempted to say the R2, but that’s far from being the case.

While Rivian’s most affordable vehicle has seen a strong start since deliveries began in June—racking up 3,456 sales in Q3—the automaker’s best-selling model during the same period was actually the RCV, also known as the EDV (the variant purposely built for Amazon).

Rivian

According to Cox Automotive data (via InsideEVs), Rivian sold 8,469 units from July through September, a spectacular 220.9% increase over the same period last year.

That made the RCV the best-selling electric van in America by far, beating the discontinued Chevrolet BrightDrop (1,344 sales), the Mercedes-Benz eSprinter (396) and the Ford E-Transit (184) in the third quarter. Not only that, but the RCV was also America’s fourth best-selling EV overall, which is quite mind-blowing if you think about it.

Rivian

But wait, there’s more. Rivian sold more RCV vans than R1T and R1S trucks combined during the quarter. That is an impressive feat seeing as all three models start at around $80,000, but it’s also due to declining customer demand for the two flagship models.

R1S sales totaled 5,582 in Q3 2026 (down 31.8% year-over-year), while R1T sales numbered 1,732 units (down 27.2% YoY). Combined R1S and R1T sales stood at 7,314 units, 870 fewer than the RCV van.

Rivian’s Van Owes Its Success to Amazon

Rivian

From January through September, Rivian sold 15,685 RCVs, up 130.4% from 6,806 units during the same period last year. That’s quite impressive especially when comparing to its competitors. The Chevrolet BrightDrop sold 2,300 units during the same period, while the Mercedes-Benz eSprinter and Ford E-Transit racked up just 913 sales and 677 sales, respectively.

Of course, the big difference between the RCV and its rivals is that Rivian has a giant contract with Amazon to supply the e-commerce powerhouse with 100,000 vans by 2030. Rivian is estimated to have delivered around 50,000 vans to Amazon so far, which means that it has more than three years left to build another 50,000 and complete the order.

Rivian

The Amazon deal is the main driver of RCV sales growth, although Rivian’s electric van has also become available for other commercial and fleet customers since 2023. While no official data is available, it’s safe to assume that the vast majority of Rivian vans sold so far this year went to Amazon.

The Rivian RCV comes in two flavors: a short-wheelbase Delivery 500 model priced from $79,900 and a long-wheelbase Delivery 700 priced from $83,900. Both variants are equipped with a front-mounted electric motor and offer an estimated range of around 160 miles. Rivian is also developing a dual-motor AWD version and a larger-capacity battery that will enable a longer range.

Rivian

Ford Built 5,000 Fathom Castings, But None Will Reach Customers

Ford’s On a Roll

The Ford Fathom is nearly upon us, and the Blue Oval’s been hard at work making sure that the first batch is up to scratch. Whenever stories like these come out, it also sheds a light on how complex car manufacturing, plus how cool Ford’s unicasting method is, and the lengths the brand is going to ensure that it is perfect.

We can expect the unicasting method to become the new standard for Ford for its next generation models. The Fathom is one of the planned cars to adopt the method first, followed by the F-150. Ford Fathom production is already underway, and Ford has made 5,000 Unicastings and counting as per its last press release, all of which are not actually destined for the final production model.

Unicasting is Ford’s Future

The Shelbyville Technical Center is home to the Unicasting method. For now, the Unicastings are getting sent to the Louisville Assembly Plant ahead of the 2027 Fathom’s launch for process testing and prototype assembly—not for final production models, not yet at least.

Ford’s architecture for the Fathom pickup truck involve two large pieces. These structures reduce mass and improve overall energy efficiency. Ford states that the unicasting metho reduces the 146 structural parts of the chassis into just two. This is a drastic simplification in vehicle production, and it’s going to be a part of Ford’s new Universal Production System.

The Blue Oval’s engineering team has also touted that unicasted parts have modular repairability in mind. Apart from that, the innovation also brings simplicity and innovation to Ford’s production process. The Universal Production System splits the “traditional assembly line into three main branches, which allows vehicle sections to be built in parallel simultaneously before they’re even assembled into a vehicle,” said Ford in its press release.

Ford

The Process

Breaking things down one by one, it starts with aluminum in a furnace, which then gets injected into a mold for the front or rear structure of the vehicle. After the molten metal has solidified, a robot then quenches it to harden and cool.

From there, the part is inspected and stringently checked for any defects. Visual inspections reveal obvious cracks, while x-rays check for pores and voids. Optical scanners then do the work that human eyes can’t, checking the surface for any other imperfections. Following that, tensile testing and other alloy testing happens.

Of the 5,000 unicastings that Ford has done, none of them are headed to production. All of the castings are made to assemble Ford Fathom prototypes as the automaker heads into the endgame of its pre-launch teasting.

FRAME/YouTube

Inside Mazda and Toyota’s U.S. Factory as Both Brands Eye Expansion

As a crowd of dignitaries gathered on the factory floor in Huntsville, Alabama on Wednesday morning, they got a look at two Soul Red crossovers – a Mazda CX-50 and a Toyota Corolla Cross. The event marked the production of the 1 millionth vehicle to roll off the line at the Mazda Toyota Manufacturing operation in Huntsville, Alabama. Which vehicle actually achieved the milestone? Factory officials weren’t saying, craftily letting both automakers claim credit.

A Toyota Corolla Cross reaches the end of the MTM assembly line.

What mattered more was the rapid pace at which the $2.3 billion operation has ramped up. After ground was broken in 2018, construction ran into a major roadblock when COVID hit. It threatened to put the operation on hold until the two companies came up with ways to keep work going and begin the process of hiring a factory workforce now numbering 4,500 – plus another 3,500 supplier employees.

Production has steadily ramped up since a Toyota Corolla Cross rolled off the line on September 30, 2021, with Mazda’s first CX-50 following four months later. The partners expect to reach 100% of the plant’s two-shift capacity this coming month – and, with demand for the two models still growing, they’re likely to look for ways to squeeze out even more vehicles from the Alabama plant. That could mean a major expansion.

MTM Officials won’t say whether it was the Mazda CX-50 or Toyota Corolla (right) which actually became the plant’s millionth vehicle.

What’s MTM?

Toyota has had a long history of building vehicles in the U.S., starting in 1984 at a factory in Fremont, California. The short-lived venture was part of an unusual joint venture pairing the Japanese giant with its erstwhile rival, General Motors. Since then, Toyota has set up a network of its own plants across the Southern half of the U.S.

For its part, long-struggling Mazda entered into its own joint venture going in Flat Rock, Michigan in 1987, ultimately selling the operation to long-time partner Ford Motor Co. in 2012. But it soon became clear it faced challenges operating without a U.S. manufacturing base.

With Toyota needing still more U.S. production capacity and Mazda seeking a way back int, “they (found) multiple strategic reasons to collaborate,” said Mark Brazeal, MTM’s Vice President of Administration and Quality. The 50/50 joint venture broke ground in 2018 and, after struggling through the pandemic, the operation launched production three years later.

An MTM worker applies sealant on a partially assembled vehicle.

A Rapid Ramp-Up

Beyond those posed by the pandemic, plenty of other challenges needed dealing with, including finding a way to blend two very different corporate cultures. The 3.7 million-square-foot plant also had to accommodate the very different designs and processes used by Mazda and Toyota.

As it stands now, each Corolla Cross and CX-50 start out together in the stamping plant but quickly shift to separate Mazda and Toyota assembly lines. More precisely, the Corolla Cross rolling down the “Apollo” line, with the CX-50 using the Discovery line. (The names reflect Huntsville’s roll as a major center of the NASA space program.) Plant officials chose those names so the factory wouldn’t seem to be divided up into two distinct halves.

Production began slowly, both automakers focusing on quality over quantity, officials explained, the process being further complicated when hybrid versions of the two vehicles were added. But the plant is now weeks away from reaching its rated capacity of 300,000, said Rhonda Gilyard, MTM’s Vice President of Manufacturing, divided evenly between the two brands.

The factory runs two parallel lines, dubbed Apollo and Discovery, to assemble Mazda and Toyota vehicles.

What’s Next

While officials with MTM and the two automakers won’t discuss specific plans, it’s clear that they see an opportunity to further boost production, considering the strong demand for the product assembled in Huntsville. The CX-50 is now Mazda’s second best-selling model, Tom Donnelly, the automaker’s U.S. CEO, told Autoblog in an exclusive interview.

In the near-term, insiders hinted, the addition of a third shift could deliver a production boost. But that could be just a first step. “We have room to grow,” confirmed Brazeal, noting that the Huntsville factory campus has plenty of open space where additional production lines could be added. “The plant was laid out in a manner in which it could grow in the future.”

Toyota, in particular, has signaled a desire to expand U.S. production, the company last year announcing plans to invest another $10 billion in the U.S. While an all-new plant could follow, it has signaled that much of the investment would go towards expanding existing operations. As for Mazda, the small, Hiroshima-based company has nowhere near the cash resources but is still determined to grow, Donelly said. It delivered 410,346 vehicles in 2025 and has set a target of reaching 500,000 in the not-too-distant future. As with Toyota, the company sees significant advantages in local production, especially in light of the Trump tariffs on Japanese auto imports. Expanding the MTM joint venture appears to be high on the list of options for both of the partners.

One U.S. State Made a Small Change to Its Drunk-Driving Law, and Crashes Fell

Over 10,000 people are killed in the U.S. each year due to alcohol-related crashes, and any reasonable measure that can lower this number is well worth implementing. A new study on Utah’s stricter alcohol limit laws for drivers suggests that alcohol-related crashes have dropped noticeably since the state implemented lower blood alcohol concentration (BAC) limits for drivers. The study was run by the Insurance Institute for Highway Safety (IIHS) and its findings may encourage other states to implement lower BAC limits, too.

Utah’s Strict Alcohol Laws Are Working

Washington Boulevard in Ogden, Utah

Chase Charaba/Unsplash

In December 2018, Utah became the first state to adopt a lower BAC limit of 0.05%, down from 0.08%. It remains the only state to do so, but perhaps that shouldn’t be the case, since this lower limit was linked to a reduction in alcohol-related crashes by almost 9%. That applies to the four years after the lower 0.05% limit was put into place.

“Crash risk increases with the amount of alcohol in your system, but it spikes noticeably at 0.05%,” IIHS President David Harkey said. “A lower limit is grounded in science and also sends a message that buzzed driving is drunk driving, as the slogan goes.”

Utah’s limit contrasts sharply with early BAC limits introduced in the 1980s, which were as high as 0.15%. It stayed at 0.10% for many years in several states, before a 0.08% limit was made universal in 2005. At that time, this lower limit was required by the Department of Transportation.

Related: You won’t believe which automaker tops the list for DUI drivers

How The Study Was Conducted

Gabe Pierce/Unsplash

IIHS researchers wanted to more closely evaluate the link between the lower 0.05% BAC limit and fewer alcohol-related crashes, as earlier studies were unclear. The new IIHS study included not only police reports of alcohol involvement in crashes, but also instances where alcohol-positive tests were added to crash reports at a later stage. Where drivers refused a BAC test, these crashes were also taken into consideration. This data was analyzed by IIHS Senior Research Scientist Angela Eichelberger and independent researcher Scott Tippets.

Utah crashes involving alcohol were compared before and after the stricter law was introduced in 2028, and these results were also compared with crash rates in Arizona, Idaho, and Colorado. Compared with these three other states, Utah’s share of alcohol-involved crashes declined by between 12 and 21%.

“These encouraging results from Utah should make other states take note,” Harkey said. “More than 10,000 people lose their lives in alcohol-related crashes every year in the U.S. We need to use every tool we have, including stricter BAC limits, to reduce that toll.”

There were a few factors complicating the results, such as the fact that Utah has typically had one of the lower rates of alcohol-involved crashes in the country.

Related: Is It Safe to Drive When Hungover? What Most Drivers Get Wrong

Tackling Drunk Driving From Multiple Angles

rezasaad/Unsplash

Driving under the influence of alcohol continues to be a major problem in certain states, with a 2024 study from the Simmrin Law Group listing South Carolina, Texas, New Mexico, Wyoming, and Montana as being the worst states for drunk driving deaths. In that same study, Utah had the lowest percentage of alcohol-related fatalities, so the very state where the issue is least prevalent has the strictest BAC laws.

Authorities continue tackling the problem from various angles, with one of the most contentious developments being a new bill that aims to mandate drunk driver detection technology in new cars. Ultimately, such technology would make a vehicle undrivable if a drunk driver is detected. It sounds like a straightforward solution, but it’s riddled with hurdles. For starters, there are privacy concerns about how much data one’s car should be able to collect about its driver. More pressingly, the detection tech that the government wants to implement doesn’t exist, as confirmed by the National Highway Traffic Safety Administration (NHTSA).

Utah’s progress in reducing alcohol-related crashes is encouraging, but more research is needed to determine whether dropping the BAC limit will see the same results in states where drunk driving is a bigger concern. Right now, this is a more logical step to address a widespread road safety issue than getting new cars to assess the sobriety level of drivers.

Related: Lawmakers Are Pushing Tech That Could Block Drunk Drivers From Starting Cars

America’s Best and Worst States for EV Charging in 2026, Ranked

America’s public EV charging network is still growing, but far more slowly than it used to. Charger growth is projected at 15.5% this year, down from 25.7% in 2025, according to a new iSeeCars analysis of data from the U.S. Department of Energy’s Alternative Fuels Data Center.

Access already varies widely. In the best-served metro area, there are about 334 residents for each charger. In the worst, that number climbs to 2,904.

The Network Is Growing, Just Not as Fast

The study counts individual Level 2 and DC fast charging ports. By that measure, the U.S. is projected to add 40,243 chargers this year, bringing the total to 299,798, according to the iSeeCars study. The national ratio is projected to improve from 1,317 residents per charger in 2025 to 1,143 in 2026. Annual growth held above 30% for most of the past decade.

Fast chargers alone show a similar trend. Charging data firm Paren, which tracks only DC fast charging, reports that new fast-charging ports installed through the first three quarters of 2026 are running about 9% behind last year’s pace, and new stations about 20% behind, even as fast-charging sessions rose 26% year over year in the third quarter. The U.S. now has 80,964 DC fast ports.

Zac Palmer

Drivers are also outpacing plugs. The Alliance for Automotive Innovation counts about 7.5 million EVs on U.S. roads and roughly 31 EVs per public charging port as of the first quarter of 2026.

Federal support has thinned at the same time. The National Electric Vehicle Infrastructure program, which set aside billions for highway fast chargers, was frozen and challenged in court in 2025. In February 2026, Congress passed a spending law that redirected roughly $879 million in previously approved EV charging infrastructure funds to other uses. No study directly ties the broader slowdown to these funding changes, but they add uncertainty for companies deciding where and when to build.

The Best and Worst States

Vermont ranks first with 450 residents per charger, while Louisiana ranks last at 4,717, more than ten times as many. California dominates on volume, with 81,932 chargers, more than a quarter of the national total.

Rank

Most EV-Friendly

Residents per Charger

Least EV-Friendly

Residents per Charger

1

Vermont

450

Louisiana

4,717

2

California

480

Mississippi

3,541

3

Massachusetts

539

Kentucky

3,270

4

Colorado

651

Alaska

3,254

5

Connecticut

677

West Virginia

2,942

6

Washington

763

North Dakota

2,776

7

Maine

793

South Dakota

2,710

8

New York

816

Indiana

2,623

9

Oregon

894

Arkansas

2,572

10

Maryland

981

Nebraska

2,398

National average

1,143

Source: iSeeCars, based on Department of Energy data through September 2026. 2026 figures are projected.

Residents per charger is a rough measure. It does not capture how busy stations are, how fast they charge or how far apart they sit, but it is a useful way to compare regions. The states that trail are mostly not catching up. North Dakota shows no improvement over last year, and Wyoming improved just 2.8%. New Jersey and Washington lead with gains of more than 22%.

The Best and Worst Metro Areas

San Francisco-Oakland-San Jose leads the 50 largest metro areas with 334 residents per charger, followed by San Diego at 432 and Los Angeles at 500. Los Angeles has the most chargers of any metro, at 36,318.

Louisville sits at the bottom with 2,904 residents per charger, followed by Indianapolis, Milwaukee, Greensboro-Winston Salem and San Antonio. Minneapolis-St. Paul is improving fastest, with residents per charger down 22.5%.

Reliability Is Better, but Not Fixed

A nearby charger is only useful if it works. In J.D. Power’s 2026 EVX Public Charging Study, 12% of visits to public chargers ended without a charge in the most recent quarter, roughly one in eight. That is the lowest rate in the study’s history, down from 14% a year earlier.

J.D. Power says public charging is the top reason new-vehicle shoppers reject EVs.

Satisfaction with DC fast charging rose 12 points to 666 on a 1,000-point scale, while satisfaction with slower Level 2 public chargers fell 12 points to 595. Ionna, the fast-charging network backed by a group of automakers, ranked highest at 807, followed by the Mercedes-Benz Charging Network and the Rivian Adventure Network.

Owners were most satisfied with fast chargers at hotels, gas stations and restaurants, and least satisfied with those at dealerships.

Rivian

Tesla’s Network Is Now Open to Most Brands

The shift to Tesla’s NACS plug has made the Supercharger network far more useful for non-Tesla owners. Many major brands now have access to Superchargers, either with an adapter or through a native port on newer models such as the 2025 and later Hyundai Ioniq 5 and Kia EV6 and the 2026 Toyota bZ. Access and adapter needs vary by model year, so it is worth checking your specific vehicle.

Tesla accounts for roughly half of all U.S. DC fast charging ports, according to Paren, so Supercharger access can make a big difference for non-Tesla owners.

What Charging Actually Costs

Where you charge makes a bigger difference than ever. For an EV that averages 3.5 miles per kWh and a gas car that gets 30 mpg, here is what 250 miles costs at current prices:

How You Fuel

Cost for 250 Miles

Cost per Mile

Home charging (18.2 cents/kWh)

About $13

5.2 cents

Gasoline ($4.30/gallon)

About $36

14.3 cents

Average DC fast charger (54 cents/kWh)

About $39

15.4 cents

Home rate based on the EIA’s August 2026 average residential price of 18.16 cents per kWh. DC fast price is Paren’s Q3 2026 national average. Gas price is the AAA national average on Oct. 24, 2026. Figures exclude charging losses.

At today’s prices, relying on public fast charging can cost slightly more than filling up with gas. Charging at home costs about a third as much.

Home electricity rates vary widely by state, too. At August rates, adding 250 miles at home costs about $9 in Louisiana, which has some of the cheapest residential power in the country but the worst charger access in the iSeeCars ranking. The same charge costs about $21 in California.

A home Level 2 setup typically runs $1,000 to $2,600 including hardware and installation, according to installer Qmerit, and a panel upgrade can add $1,500 to $3,000. The federal tax credit for home chargers ended for equipment installed after June 30, 2026.

What to Check Before You Buy

iSeeCars executive analyst Karl Brauer says local charging access “should be a primary consideration” for EV shoppers. A few practical steps:

Search your ZIP code. The Department of Energy’s station locator shows nearby public chargers and whether they are Level 2 or DC fast.

Price out home charging. If you can charge at home, public charger density matters far less, and you pay far less per mile.

Check Supercharger access for your model. Confirm whether it has a native NACS port or needs an adapter.

Map your regular routes. State and metro averages can hide long gaps between towns.

2026 Cadillac Optiq-V

Cadillac

Audi Almost Built Cars in America, Until Germany Changed Course

Odd One Out

Audi has been in America for over 50 years, officially entering the market in 1970. Compared to BMW and Mercedes-Benz, it’s a relative youngster, and one thing it still hasn’t done is build a plant in the U.S. BMW opened its plant in Spartanburg, South Carolina in 1994, while Mercedes followed suit in 1997, building in Vance, Alabama.

That’s ironic given that its parent company, Volkswagen, opened its first U.S plant in 1978. It closed in 1988, but resumed domestic manufacturing in 2011, moving from Westmoreland, Pennsylvania to Chattanooga, Tennessee. Now, Audi is rectifying that by setting its plans in motion to build in the U.S.

Jared Levenson/Autoblog

Decades in the Making

That said, this wasn’t a decision out of the blue, nor were tariffs the only reason for building it, although it did play a part in it. The thing is, this was decades in the making, and that’s according to retired Volkswagen of America CEO and Audi of America president, Johan de Nysschen.

He made that revelation during a sit-down with Automotive News, and plans for Audi’s American assembly plant go as far back as the 2000s. He was there when it all began, and shared some of the several reasons why it kept being pushed back, and why the company is rushing to get the factory completed.

Audi

Where it All Began

As early as 2008, there were already plans to start American assembly. Regional executives were heavily advocating for it at the time. De Nysschen was also on board with the plan, as it should help with the brand’s bottom line. However, executives in Germany ultimately decided on Mexico, mainly to capitalize on the lower labor and manufacturing costs, on top of avoiding import duties.

“We were, in my opinion, pretty well down the road to landing it, when somehow at five minutes to midnight there was a pivot, and they decided to go to Mexico,” said de Nysschen. He also cited that Germany wanted a return on its investment quicker, stating that the decision to choose Mexico over the U.S was “transactionally driven.” He called that approach short-term focused, and the result now is Audi losing ground to its compatriots in North America in terms of revenue as it’s now forced to pay billions in tariffs.

Jared Levenson/Autoblog

Had the Ship Sailed Long Ago?

De Nysschen pointed out the consequences of Audi not being able to build stronger roots in America, noting that it had missed out creating a two-way trade ecosystem. It could’ve followed the same playbook as BMW and Mercedes wherein both made the U.S their major hub for SUV assembly. Just take a look at the X3 and X5, as well as the ML/GLE and GLS, with these SUVs not only being made in America, but also being exported to most markets.

“You cannot only produce in the market for the market, and what happens to be able to be exported is [the] cherry on top. Exports have to be strategically planned as part of the whole equation, so that you have capital tooling only once. You produce for the world in the U.S., and you produce for the world in Germany,” said de Nysschen. Given how successful the Q7 and Q5 had become, Audi could’ve avoided all its current hardships had it planted its flag in America far earlier.

Audi

“Masters of their Own Destiny”

Audi could’ve utilized the available VW Group facilities that were already present in America at the time to get things started. That said, the company has chosen to build a plant away from both VW and Scout Motors, choosing Peach County, Georgia as the site of its first-ever U.S assembly facility.

There’s no doubt that sharing lines with VW and Scout would’ve been the more cost-effective solution, but de Nysschen sees the reason behind the decision to go solo. “Ingolstadt does not like to be dictated to by Wolfsburg, and they want to be masters of their own destiny. So many people who are ignorant say, ‘Oh, Audi is just a luxury Volkswagen.’ It’s not true, but if they are built in the same plants, that reinforces that perception.” Pride is a factor, yes, but so is image and perception.

There is a risk in doing all of this, though, as explained by de Nysschen. “You are trapped in this sort of vicious cycle. You can’t build volume because you’re too expensive, and because you don’t have volume, you are too expensive.”

Audi

A Cruicial Move, Nonetheless

External pressure, rather than investment, is possibly the biggest reason why Audi had finally decided to build in America, at least in de Nysschen’s opinion. “How should this company survive? Its domestic market has now been eaten up by the Chinese. Fact. The biggest Chinese market has been destroyed by the Chinese. What’s left? United States. They had better make it here. And by making it here also means manufacturing here. It’s fact. It’s given. It’s a requirement. You cannot win without building here.”

The Japanese automakers latched on to that way before China joined the automotive powerhouse club, and it’s served the likes of Honda and Toyota very well over the decades. BMW and Mercedes also realized that, and both are not suffering as much as Audi in terms of tariffs and penalties.

Right now, Audi CEO Gernot Döllner is facing a lot of backlash for appearing in a recent Trump rally. That’s one more thing on his stacked plate right now, and it could turn prospective customers away, especially during these politically-charged times. Still, the plant needs to be done, not just for the sake of circumventing tariffs, but rather, build up long-term investment in the U.S, something its rivals did decades prior.

2025 Audi Q5

Audi

GMC Yukon Owner Says Nearly $10,000 in Repairs Still Didn’t Fix SUV

From Dream to Nightmare

Getting that brand-new car one always wanted is one thing, but the after-sales service is another matter. The joy of owning the car can quickly be soured by a nasty experience from the dealer. It’s not a rare occurrence, either, with loads of stories like that floating around the web.

One such case is from a GMC Yukon owner who documented their taxing experience over the last couple of months. It all started with a sensor failure, and problems snowballed from there.

The Start of the Problems

In a report by Motor1, Kristen Negri’s 2021 GMC Yukon started suffering from low oil pressure and levels, followed by valve lifter and camshaft issues. It reached a point where the car became undrivable when it started shaking, leading Negri to bring her Yukon to the dealer for repairs.

Negri was told it would take $9,900 to repair her Yukon, to which she gave the green light to get things started. However, she was later told that the parts she needed were backordered or unavailable, and that the repairs would take about two months, more or less. Do note that the owner says the vehicle is well-maintained, and before you ask, it has the 5.3-liter and not the 6.2-liter that’s seen its fair share of problems.

Can of Worms

Unhappy with the service, Negri pulled her Yukon out of the dealer and sent it to an independent shop instead. The SUV got a new camshaft and all 16 lifters were replaced, but a barrage of other issues then cropped up, allegedly due to the previous work done by the dealer to address the original problem. It was discovered that one valve was shorter than the other, and that a valve seat had shifted during installation. At the time of writing, the Yukon is still out of commission.

Negri said GM tried to help by offering partial assistance for the lifter replacement, as well as covering rental car costs. GM then pulled that offer when Negri brought the Yukon to an independent mechanic. The company then tried to fix the matter by offering $3,500 off her next vehicle, an offer she refused.

It’s been a saga for Negri and the Yukon, but she did say she loved the car and hoped for a better resolution. Instead, the opposite happened. Speaking to Motor1, she said, “I loved this vehicle. Its space and usefulness are exactly why we bought it, and I would have preferred to repair it and continue driving it confidently. Instead, our family has spent approximately $10,000, gone almost 60 days without the Yukon, and dealt with repeated repairs and uncertainty. I have had to consider replacing a vehicle I wanted to keep.”

Service Expectations

She’s questioning why the parts would take that long and why the prior oil issues weren’t addressed. Considering her Yukon is still the current generation (pre-facelift), one would also think that it wouldn’t take too long for the parts needed to arrive. She has since filed a complaint and sent it to the Better Business Bureau and has attempted to make contact with Rivard Buick GMC and GM corporate. The dealer and GM have allegedly ignored her.

“The most frustrating part is that I sought help through the dealership first. When GM could not supply the parts, I found another way to get our family vehicle repaired. GM then used that choice as the reason to deny reimbursement, while offering a discount to buy another vehicle from the same company. My official position is that GM does not care about its customers whatsoever, and I’m considered one of the lucky ones that made it to 100k,” said Negri.

People turn to dealers for any concerns in their cars, and when they fail to meet service expectations, the more you hear statements like ‘never take your car to the stealership.’ One bad dealer experience can also ruin one’s experience with an entire brand; it’s extremely difficult or even impossible to repair the relationship once that trust is broken.