The Honda CR-V Has A Visibility Problem That Shouldn’t Exist In 2026

Even some of the most popular, highly regarded cars in the world have their quirks. We found out that much with the latest Toyota RAV4, which has a center console design that many owners have found compromises comfort. It turns out that the Honda CR-V, the RAV4’s fiercest rival, has an unusual pain point of its own. The best-selling SUV in the U.S. this year so far, numerous CR-V owners have uncovered flaws in the Honda’s windshield wiper design. One would imagine that getting a wiper design wrong in 2026 is near impossible, but a lot of CR-V owners have been left frustrated by the wiper system’s inability to properly clean the windshield.

What’s Wrong With Honda’s Wiper Design?

2023 Honda CR-V

Honda

There are two separate issues with the CR-V’s wiper design, both of which have been spoken about at length on several social media forums. We also found complaints listed on the National Highway Traffic Safety Administration (NHTSA) website.

The first issue involves the placement of the wiper system spray nozzles, which are situated on the wiper arms themselves. Many owners have found that when attempting to clean the windshield, the nozzles only begin spraying water when the wiper blades are roughly halfway up the windshield. As a result, many owners have complained that it’s not possible to properly clean the windshield, particularly in snowy or icy conditions, where hood-mounted nozzles would be more practical and better able to disperse the water.

“I will die on this hill. The wipers (especially when I’m using them w/windshield wiper fluid) are my ONLY gripe about this car. The design is terrible,” said one owner on Reddit. 

“Having the windshield wiper fluid come out of the blades rather than spraying directly onto the windshield is useless as the fluid comes out while the wipers are half way up and fluid then gets pushed off the windshield and flows down the driver’s side window again affecting the driver’s visibility,” said another owner of a 2023 CR-V, who is based in Connecticut. This owner shared their experience on the NHTSA’s website.

These wiper-mounted nozzles are meant to eliminate the wind deflection or blind spots created by traditional, hood-mounted nozzles, but it appears that the current CR-V’s nozzles have not been properly engineered.

Not The CR-V’s Only Wiper Issue

The second issue involves the driver’s-side wiper, which several owners say does not reach the edge of the windshield on the left. This leaves a significant portion of the windshield covered in dirt, creating another visibility concern. Some owners say the wipers only work properly if the vehicle is in Accessory Mode, while others were told by dealerships that the gap left on the driver’s side is normal.

Honda CR-V windshield

MattsGarageMiscDIY/YouTube

“While driving my 2025 Hybrid CRV with 4K miles in a light rain, the wiper stopped going all the way to the edge and now only goes 90% of the way up no matter the setting. In a heavy rain, it will go 96%, and in accessory mode it goes up 100% of the way,” said an owner of a 2025 CR-V on Reddit. Other owners in the thread reported the same issue, with many filing complaints with the NHTSA and hoping for a recall. After all, visibility-related safety defects are often considered serious enough to initiate a recall.

A video posted by another Reddit user shows that an unacceptably large portion of the CR-V’s windshield isn’t reached by the left wiper blade, with a few commenters suggesting that it’s a software issue, not a mechanical alignment problem. 

Related: How to change wiper blades and washer fluid | Autoblog Wrenched

Autoblog’s Take

2023 Honda CR-V Hybrid

Honda

Manufacturers have invested heavily in technologies that enhance driver visibility, from blind-spot monitoring systems to surround-view monitors and pedestrian detection systems. But all of that doesn’t mean much if one of the most basic safety features, the windshield wiper, doesn’t do its job properly. At the very least, the performance of the current CR-V’s windshield wipers are inconsistent from one model to the next. While no recall has been issued for this condition and windshield wiper testing does not form part of safety tests run by the Insurance Institute for Highway Safety, that does not mean there isn’t a genuine concern. As visibility impacts overall safety, we would like to see Honda address the concern.

Related: Honda CR-V Generations Overview: Honda’s Most Important Crossover

BYD’s Yangwang U9 Extreme Wrecked During Suspected 310 MPH Test Run

Realities

BYD plans to make its Yangwang U9 Extreme live up to its name by trying to break past 310 mph during a high-speed run. In the previous article, we quoted top brand executives saying another high-speed run is planned, with the front-runner venue set to be in Dubai sometime this November.

The likely Dubai speed run will be heavily documented and publicized, which means BYD will be preparing the U9 Extreme behind the scenes with additional tests. Sadly, it seems one test has gone very wrong, with video and photos of a U9 Extreme crashing at high speed now exposed online.

In Pursuit Of Speed

CarNewsChina just published a report and video showing the BYD Yangwang U9 Extreme in a crash. It was wrecked during what appears to be a high-speed test run. What’s interesting is that the video appears to have been released to the public. The video also seems professionally produced, leading us to believe official sources may have released it. In the video, we see snippets of what happened, focusing on the crash on a closed-off, high-speed banked oval track.

The video begins with the U9 Extreme losing traction and grip before violently slamming into the barrier. It doesn’t indicate how fast the driver was going, but based on the footage and damage, he was probably traveling at a decent pace before crashing. The damage stripped the car of its recognizable parts, leaving only the chassis shell.

Incredibly, the cabin remained intact, allowing the driver to be retrieved from the car immediately. Furthermore, the video also shows that after a battery of health checks and tests, the driver walked away injury-free, a testament to how safe the U9 Extreme’s build is.

Car News China

Laws of Science

While the news of this accident is both good and bad, the reality is that traveling at those speeds brings science into question. The faster the car, the more it needs to handle the laws of physics and science that push back at high speed. It’ll need the right aerodynamics, but most importantly, the right tires to put all that power down at those speeds without breaking or losing traction.

Does the U9 Extreme have the right equipment to breach past the 310 mph mark? We have yet to see, and it should be interesting to see the brand continue its planned run in Dubai.

Ford Gives a 1966 Mustang a 360-HP V8 and Five-Speed Manual

Classic Mustang Meets Modern Racing Heritage

Since 1964, the Ford Mustang has been the go-to canvas for anyone wanting to keep that classic vibe but sneak in some modern muscle. The first-gen Mustang especially is a fan favorite, mostly because it looks the part and isn’t a nightmare to wrench on.

Ford’s leaning right into that nostalgia with the R125 Mustang project. Starting with a 1966 Fastback, they’re marking 125 years of Ford Racing and showing off just how wild you can get with their latest performance parts if you’re building up a classic. This is a project of Ford Customer Service Division, Ford Racing Parts, and Ford Customization.

Ford

A Familiar Fastback With Racing-Inspired Details

The bones here are pure 1966 Fastback, so you still get those classic lines everyone loves. But Ford’s given it a meaner look with a black paint job and some loud red and gold touches.

You can’t miss the R125 graphics – big lettering and a bold Ford Racing badge run down the sides. Gold wheels crank up the flash, and the front gets its own R125 makeover. Out back, Ford Racing is splashed across the panel, just in case you forgot what this build is all about.

All these tweaks give the Fastback its own vibe, but you still know it’s a ’66 Mustang at heart. The graphics and color pops make it obvious this isn’t just a restoration – it’s a full-on tribute.

Ford’s keeping quiet about what’s going on inside, so no word yet on the cabin details. For now, it’s all about the looks and the hardware under the skin.

Ford


View the 2 images of this gallery on the
original article

A 360-HP V8 With a Five-Speed Manual

Pop the hood, and you’ll find a 347-cube crate V8 pushing out 360 horses and 400 lb-ft. It’s a mix of Ford Racing Boss block, aluminum heads, and Edelbrock Pro-Flo EFI – old-school muscle with a modern twist.

That fuel injection setup keeps the classic V8 feel but makes the car way more livable for anyone who actually wants to drive it. Ford’s ditched the all-original carburetor setup for something you can easily enjoy owning. Power goes to the wheels through a Tremec TKX-600 five-speed, which is smoother and tougher than the old TKO. Plus, it’s compact enough to fit in builds where you actually care about how the thing drives.

Ford Racing Parts even threw in their trick two-piece valve covers, with swappable tops, O-ring seals, and built-in wire looms – because why not go all out?

The R125 will hit the spotlight at the 2026 SEMA Show for Ford Racing’s big 125th bash. Don’t expect to see it at your local dealer or find a price tag – this one’s all about showing off what you can snag from the Ford Racing Parts catalog.

Ford


View the 5 images of this gallery on the
original article

Lincoln Recalls 11,623 SUVs That May Shift Into Neutral While Driving

One Thing Leads To Another

The automotive industry’s pace is rapid these days. Instead of launching new models every few years, manufacturers are finding ways to refresh, update, or launch cars more quickly to keep buyers interested and capture the market’s short attention span.

While the pace has its benefits, such as a wide variety of up-to-date cars, sometimes it can also lead to production errors. In some cases, these errors start as small, insignificant issues but end up causing much bigger problems. Lincoln’s latest recall advisory represents that very idea: a small fault with big consequences.

Lincoln

Anti-Rust Failiure

The National Highway Traffic Safety Administration (NHTSA) just issued Safety Recall Report 26V688. This report affects the Lincoln brand, specifically the Lincoln Corsair and the Nautilus. In total, the report lists 11,623 affected vehicles, most of which are Nautilus (11,560), with only 63 affected Corsair units. For the Corsair, the affected cars were built from Mar 12, 2026 to Jul 08, 2026, while the Nautilus units were produced from Sep 09, 2025 to Aug 06, 2026.

All NHTSA reports are detailed and sometimes very specific; here is how the report explains the specific issue: “Ford’s team reviewed supplier manufacturing records to determine the population of affected vehicles. Affected vehicles may have been produced with an anti-rust oil that may degrade the conformal coating on the Printed Circuit Board (PCB) of the Integrated Parking Module (IPM). Affected vehicles have HF55 transmissions.

Those who know cars and engineering may already have a sense of how bad the issue is based on the description above. Thankfully, the NHTSA report also has a more layman-friendly explanation: the anti-rust oil could degrade the coating on the PCB, which might cause a drop in voltage for the rotary sensor. If the voltage drops, it could inadvertently shift the car into Neutral while driving, which is a major safety risk. Another issue is that low voltage might also prevent you from shifting out of Park to get going.

Lincoln

The Fix

According to the report, Ford was not informed by the supplier that the anti-rust oil was changed. Additionally, the new oil didn’t undergo proper validation tests to confirm its compatibility with the part it was applied to. The report also stated that affected cars would be notified through dashboard messages displaying “Service Vehicle Soon” or “Shifting System Error”.

To fix the problem, the Integrated Park Module (IPM) will be replaced with a module that does not contain anti-rust oil that degrades the conformal coating, and the replacement module will be updated with the latest software.

Lincoln

The Original Acura NSX Is Getting Thousands Of New Parts In The U.S.

For many enthusiasts, the best cars of all time have already been made, and no amount of modern technology can replace the mechanical simplicity of driving a classic sports car. The problem has always revolved around keeping a 30-year-old car maintained, particularly as parts become scarce. Acura has addressed this concern for owners of the original, first-generation NSX. The automaker has officially launched the Honda Heritage Parts program in the U.S., with over 3,000 reproduction parts now available for the iconic sports car.

Heritage Parts Program Starts With NSX

1991 Acura NSX

Acura


View the 3 images of this gallery on the
original article

The new program first became available in Japan in April, but Honda has delivered on its promise to expand it to other regions. The new Honda Heritage Program will support various Acura and Honda performance models, with the original NSX—produced between the 1991 and 2005 model years—being the first beneficiary.

For now, owners of the NSX can choose from over 3,000 reproduction parts, which are available via Acura dealerships nationwide. As reliable as the original NSX is—some examples have comfortably exceeded 300,000 miles—any car that old will require significant upkeep as mechanical components, rubbers, and plastic parts age.

“Honda Heritage Parts was created to help our customers enjoy their classic Acura and Honda performance models, and it’s appropriate that we begin with an iconic model like the first-generation Acura NSX,” said Mamadou Diallo, executive vice president at American Honda Motor Co., Inc. “By supporting our customers in preserving the legacy of the NSX, we’re celebrating our shared passion for these iconic sports cars and keeping them on the road for today’s enthusiasts and future generations.”

Parts can also be purchased through the Honda DreamShop. Here, customers can already find thousands of parts for the NSX’s engine, transmission, chassis, and more.

Related: Honda is Giving a Second Life To Owners of Its Coolest Sports Cars

The Original NSX Is Still The Benchmark

1991 Acura NSX

Acura

Although the second-generation Acura NSX was an accomplished hybrid sports car, it never quite captured the magic of the original. The first NSX debuted at the Chicago Auto Show in February 1989 before going on sale as a 1991 model. An innovator from the start, it was the first production car with an all-aluminum chassis and body, which weighed 40% less than steel.

That first NSX had a 3.0-liter V6 engine producing 270 horsepower and 210 lb-ft of torque. With the advanced VTEC system making its U.S. debut on an Acura model, the car reached 60 mph in under six seconds, and the driver was involved in the process all the way thanks to the standard five-speed manual gearbox.

The hand-assembled NSX’s low, sleek design has stood the test of time, and high Japanese quality standards made it a car that could be enjoyed for many years without breaking down. Incrementally improved over the course of its extended production run, the NSX eventually gained a larger 3.2-liter V6 with 290 hp. 

Cumulative U.S. sales of the NSX reached 8,733 units, and well-kept examples demand six-figure prices today.

What It Means

1991 Acura NSX

Acura

The new Honda Heritage Program will make it infinitely easier for NSX owners to enjoy their cars for many more years to come. Using original, high-quality parts means these cars can perform at their best.

Over the next few months or years, there are many legendary Honda/Acura models we expect to be included in this program. One obvious candidate includes the Honda S2000, as the oldest versions of this high-revving sports car are now over 25 years old. Earlier generations of the Honda Prelude as well as sporty variants of the Acura Integra/RSX are also likely to make the cut at some stage.

Related: Honda NSX Restomod Packs 425 HP and a Six-Speed Manual

Ringbrothers Just Made the Ultimate Pontiac GTO

The Pontiac GTO Is Iconic for Many Reasons

The Pontiac GTO is one of those cars everyone knows, and for good reason. It helped kick off the muscle car craze in the ’60s, and its impact is still felt long after the original left the scene.

With a name like that, you just know someone had to give it the restomod treatment. Enter Ringbrothers and their latest wild idea: Billie. This one started out as a humble 1965 Pontiac Tempest Convertible before getting the full transformation.

Ringbrothers, based in Wisconsin, has a reputation for going all-out on their builds. These are the folks behind the 805-hp Aston Martin DBS-based Octavia, just to name one. Now they’ve set their sights on Pontiac muscle, and the result might just be the wildest GTO we’ve seen.

This project ate up more than 5,500 hours, packed with metalwork, fabrication, and some serious engineering wizardry.

Ringbrothers


View the 2 images of this gallery on the
original article

A Wider Body and a Thoroughly Reworked Interior

The first thing you’ll notice is the bodywork. Ringbrothers stretched the car five inches wider, gave it reshaped front fenders, beefed-up rear quarters, and longer rocker panels. Carbon-fiber doors and a bunch of custom panels round out the look.

Jim Ring says the team obsessed over getting the lines just right, making sure the mods looked natural and not overdone. With a car like the GTO, keeping that classic shape is half the battle.

The whole thing is finished in a custom color called Billie Goat Blue, with shiny chrome and black accents. Custom bumpers, a billet aluminum taillight panel, and a carbon-fiber diffuser with built-in exhausts complete the package.

Inside, it’s just as wild. The dash is pushed four inches forward and dropped two inches for more space up front. You get new aluminum trim, a digital display, and even the original radio reworked with Bluetooth.

One quirky touch: the custom shifter is inspired by an olive wood espresso portafilter. It’s a weird choice, but somehow it works with the hand-built vibe.

Ringbrothers


View the 2 images of this gallery on the
original article

Supercharged V8 Power and Modern Underpinnings

Under the hood, there’s a supercharged 6.2-liter LT4 V8 from Wegner Automotive, good for 650 horsepower and 650 lb-ft. That’s a massive jump over anything the original GTO ever dreamed of. All that power goes through a Bowler 10-speed auto. Ringbrothers even built a custom exhaust with Flowmaster bits, so it sounds as mean as it looks.

Underneath, Billie sits on a Roadster Shop Fast Track Stage III chassis with FOX coilovers and six-piston Brembos. HRE G-Code wheels – 19s up front, 20s out back – are wrapped in sticky Michelin Pilot Sport Cup 2s. All this should make Billie handle way better than any stock GTO, especially with all that LT4 muscle under the hood.

If you’re hoping to buy Billie, you’re out of luck – this one’s headed to a private owner after its 2026 SEMA Show debut in Las Vegas. No word on price, but with over 5,500 hours sunk into it, you can bet it wasn’t cheap.

Ringbrothers


View the 9 images of this gallery on the
original article

Nissan Gives the Pathfinder a 4-Inch Lift and Old-School Off-Road Makeover

It’s SEMA Season Again

On face value, the Specialty Equipment Market Association doesn’t sound like much, but if you say it as SEMA, that’s when it catches the attention of enthusiasts. For over 40 years, the SEMA show has showcased some of the latest aftermarket parts, but also showcased some of the best builds and has become a platform for automakers to let their hair down a bit. This year is no exception, of course.

A good number of carmakers have joined the show. Nissan is one of the many, and it has brought three builds for the occasion. There’s the Frontier Ronin Concept, the Armada Jungle Patrol Concept, and the Pathfinder XE-V6 Concept. There’s a good number to cover, so we’ll kick things off with the Pathfinder.

Nissan

A D21 Tribute

The Nissan Pathfinder changed quite a lot over the years. It started as a Hardbody pickup-based SUV in the ’80s, then became a unibody in the ’90s that still retained truck suspension. After that, it reverted to a truck-based SUV in the 2000s, this time being based on the Frontier, and now, it’s a crossover.

The current Pathfinder is a decent choice in its class, but we wouldn’t really call it an off-roader by any means. Sure, there’s the Rock Creek Edition, but the trim gives more traction on the rough stuff thanks to all-terrains, and nothing really more. It’s a far cry from the D21 from over 40 years ago, having a completely different set of priorities.

Still, that didn’t stop Nissan from looking back to build a special one-off model. Simply called the XE-V6, it nods to one of the slightly lower trims of the original Pathfinder. While that sounds odd, the XE-V6 was the no-nonsense trim that had enough creature comforts at the time but still retained its ruggedness for not much money.

Nissan

What’s Been Done to it?

The most obvious change that’s been done to it is the suspension. It’s a four-inch lift kit that’s a custom job, while spacers allow the chunky mud-terrain tires to poke out of the body that little bit more. The front and rear bumpers are a custom job, too, along with the rock sliders.

While no longer a frame-based SUV, the XE-V6 moniker still applies somewhat, as the current Pathfinder still sports a V6 engine. That said, it’s been left untouched, but it has a prototype NISMO cat-back exhaust system. No off-roader build would be complete without the accessories that come along with it, so there are driving lights and a roof rack, plus a spare tire carrier, winch, and underbody protection.

The original XE-V6 was offered with a graphics package, and that’s what this SEMA build tries to capture. Those old enough to remember will recall those stickers on the sides of some Pathfinders, and Nissan did a good job bringing it to the 2020s.

Nissan

It’s Cool and All, But…

It’s pretty neat that Nissan finds ways to introduce more fun concepts, but we can’t help but wonder about the future Frontier-based Pathfinder that’s coming soon. We’re not saying that this concept isn’t cool, but our brains imagine an even more rugged and squared-off SUV with such upgrades fitted.

Perhaps it’s a preview of what we can expect from the truck-based Pathfinder and Xterra in terms of customization. That said, those models are still a few years away, but if Nissan is whetting our appetites for those SUVs as early as now, consider us excited.

Nissan

Nissan


View the 3 images of this gallery on the
original article

Nissan Armada Jungle Patrol Ditches Roof and Luxury for Serious Off-Roading

After the Slew of Long-Slung Concepts

After revealing a slew of low-slung SEMA concepts last week, including a rad 300-horsepower Sentra SE-R Spec-V, Nissan is turning its attention to something considerably taller. The automaker is bringing three truck and SUV concepts to the 2026 SEMA Show, showcasing different interpretations of off-road capability and customization. One of them is the Nissan Armada Jungle Patrol, which takes the full-size SUV in a rather unconventional direction.

Inspired by rugged Nissan vehicles that have tackled challenging environments worldwide, including the Patrol, the Jungle Patrol concept is designed around the idea of an expedition-ready machine. It trades much of the Armada’s conventional SUV character for an open-air configuration, specialized off-road hardware, and a safari-inspired cabin. The result is a vehicle that looks more suited to exploring remote trails than navigating the school run.

Nissan


View the 2 images of this gallery on the
original article

The Armada Gets an Extensive Makeover

The most noticeable change is the open-roof configuration, which removes the conventional roof in favor of a tubular steel roll cage. Nissan also fitted custom inward-facing bench seats with harnesses, giving the cabin the appearance of a traditional safari vehicle.

Outside, the Armada gets decked out with jungle-themed graphics, beefy tubular steel bumpers, and fender flares that mean business. NISMO Off Road throws in roof-mounted six-inch lights and rock sliders, so you can light up the trail and bash rocks without breaking a sweat.

The concept also gets a substantial suspension upgrade. Its widened track incorporates custom CJD long-travel racing suspension, featuring adjustable high-performance coilovers with remote reservoirs. This setup is paired with prototype NISMO 18-inch AXIS beadlock wheels wrapped in 37×12.50R18 Yokohama Geolandar G003 M/T tires.

Under the hood, the Armada retains its direct-injected 3.5-liter VR35 V6 engine. The standard powerplant produces 425 horsepower and 516 lb-ft of torque. Nissan adds a prototype NISMO cat-back exhaust system, while Mobil 1 Extended Performance Oil is also included in the build.

Nissan


View the 2 images of this gallery on the
original article

A Preview of Nissan’s Off-Road Ambitions

The Armada Jungle Patrol is only one of three concepts Nissan prepared for this year’s SEMA Show. Nissan says these concepts are intended to inspire owners to personalize their vehicles while allowing its designers and engineers to gather feedback on potential future accessories and product directions.

The company also pointed toward its upcoming all-new Xterra, suggesting that more capable trucks and SUVs remain part of its future plans. However, none of the three SEMA builds will become production models in their current form – though Nissan says some accessories featured on the concepts may eventually be available through dealerships.

The 2026 SEMA Show runs from November 3 to 6 at the Las Vegas Convention Center in Las Vegas, Nevada. Visitors can find Nissan’s concepts at booth No. 21521 in Central Hall.

Nissan


View the 15 images of this gallery on the
original article

Inside Doug DeMuro’s Secret Underground Car Garage

If you ever wondered where automotive YouTube sensation Doug DeMuro dreams up his daily content, the answer is appropriately unusual. Three stories below ground, entirely windowless, and accessible only via a dedicated, heavy-duty car elevator, the official Cars and Bids headquarters looks and functions exactly like a billionaire superhero’s secret automotive lair. This subterranean garage serves simultaneously as an active vehicle storage facility, an open-concept corporate office, and a fully equipped television production studio.

Because the massive concrete room lacks any interior walls or soundproofing, conducting daily corporate business here requires some incredibly creative workarounds. When DeMuro is actively filming vehicle reviews under the bright studio lights, employees are completely forbidden from taking meetings or having loud conversations due to the aggressive echo. As a result, when the staff needs to make a private phone call or join a Zoom meeting, they simply climb into a manual BMW X5 or whatever classic sports car happens to be parked nearby, essentially turning the inventory into highly expensive office cubicles.

YouTube: Petersen Automotive Museum

A Rotating Cast of Quirks and Features

The Petersen Automotive Museum YouTube channel featured Doug’s garage and the inventory parked beneath the streets of San Diego is exactly as quirky as you would expect from DeMuro. Rather than focusing exclusively on multi-million dollar exotics, the basement is filled with a fascinating, rotating cast of low-mileage oddities and future classics currently awaiting review and auction. On any given day, the floor space might feature a mint-condition Nissan Pathfinder with just 800 original miles, an ultra-rare Lotus 340R, or a pristine third-generation Acura TL.

The staggering inventory continues with a low-mileage Pontiac Firebird Ram Air, a V12 Aston Martin Vanquish, a front-wheel-drive Lotus Elan, a fifth-generation Dodge Viper SRT, and a 1960s Alfa Romeo TZ. Rounding out the diverse auction lineup is a Nissan Skyline R34, a turbo-diesel Toyota Land Cruiser 80 series, a right-hand-drive Ford Sierra Cosworth, and a 2009 Maserati GranTurismo uniquely converted to a gated six-speed manual.

YouTube: Petersen Automotive Museum

Living in the Lair

While DeMuro famously drove his 2005 Ford GT across the country rather than preserving it like an 8-mile museum piece, his current personal fleet parked in the lair includes a beloved Lamborghini Countach and a worn 1999 Mercedes-Benz G500 Cabriolet. Employee Ryan Lopez’s custom “Zesty” drift car also shares the floor. Beyond the vehicles, the facility is thoroughly equipped to keep the Cars and Bids team operating around the clock, featuring a full kitchen routinely stocked with donuts, a laundry room, and a full bathroom.

When the team actually takes a break from reviewing rare Japanese imports and manual-swapped Maseratis, they retreat to a sprawling entertainment section. The hangout space includes a large putting green, comfortable couches, and an incredibly high-end racing simulator custom-built by Linus Tech Tips. The sim is even connected to a physical leaderboard, proving that even when they are off the clock, the crew never truly stops chasing lap times. Ultimately, this hidden subterranean bunker serves as the perfect headquarters for the rapidly growing auction platform, perfectly reflecting the passionate and quirky car culture DeMuro has championed for over a decade.

YouTube: Petersen Automotive Museum

Ferrari Almost Quit Formula 1, And This $1 Million Pace Car Tells the Story

American Racing Dream

Ford and Chevrolet may be the most recognized brands in the American racing scene, but Ferrari once considered joining the fray. In the 1980s, company founder Enzo Ferrari was frustrated with Formula 1 politics and proposed regulation changes, and threatened to leave the sport. He commissioned the Ferrari 637 in 1986 for a potential entry into the CART Indy Car World Series and the Indy 500, but it never entered a race.

There was another vehicle that came out of that unusual chapter of the Prancing Horse brand’s history, which led CART entrants on the track. Well, the vehicle in question is a one-off Ferrari Mondial designed to serve as a pace car. A recent video uploaded by AVANTS on YouTube brought the pace car, now part of The Caretakers Collection, back into the spotlight, sharing some interesting bits about an American venture that never fully materialized.

A Million-Dollar Traffic Cop

The Ferrari Mondial pace car was part of the PPG Pace Car program, which fielded different vehicles at CART events, including a 1983 Dodge Daytona Turbo Z and a 1992 Subaru SVX. While the Mondial wasn’t as celebrated as Ferrari models like the Testarossa, this particular pace car has some interesting provenance.

For one, the Ferrari pace car reportedly cost $1 million to build in 1987, which, adjusted to today’s money, is around $3 million. Designed by Italian firm I.DE.A Institute, the pace car came with an extended wheelbase, redesigned front and rear bodywork, and, of course, integrated warning lights. It also featured a brake-cooling system that sprayed water through nozzles. The cabin, meanwhile, featured a custom dashboard and steering wheel, along with Kevlar and suede accents.

Powering the PPG project was an experimental 3.4-liter V8 producing a reported 300 horsepower. Forza Magazine said that the engine was being developed for the upcoming Ferrari 348. So, aside from just leading the field, the pace car also served as an early showcase for the automaker’s upcoming powertrain technology.

AVANT/YouTube

A Ferrari With A Story To Tell

This Ferrari Mondial pace car isn’t for sale. But it offers a glimpse into a lesser-known era of the Italian marque’s history, especially considering the brand is better known for its strong presence in F1.

Today, the IndyCar Series uses different pace cars depending on the event, with the 2026 Indy 500 paced by the Chevrolet Corvette ZR1X. In F1, the duties of the pace car, better known as the safety car, are handled by the Mercedes-AMG GT 63 PRO 4MATIC+.

PPG Pace Cars


View the 3 images of this gallery on the
original article