Repair Shop Quoted a Man $1,200 to Replace a $150 Muffler He Didn’t Need

Muffler Assembly: $1,000

For a thousand bucks, you could get a lot of work done on your car, and a repair shop in Vermont reviewed a quote from a “high-profile” repair shop that could have cost a customer nearly ten times the cost of the part itself.

A video was posted on TikTok by mainly_mechanics (@mainly_mechanics) detailing a quote from another shop that appears to have overcharged a customer for a part that he didn’t even need.

Quote: $1,264.40 for a New Muffler Assembly

It seems rather outrageous that a stock replacement muffler would cost over a thousand dollars to purchase. Apparently, it doesn’t cost that much, according to mainly_mechanics, while tagging TJ’s Auto Repair in Burlington, Vermont. In this video, he showed the quote that the other shop gave his customer.

The breakdown of the muffler replacement was as follows: $1,082 for the replacement muffler assembly, $17 for the gasket, and $4.24 for the nuts and bolts; then the rest is for about 48 minutes of labor, which totals $1,264.40. On the same quote was a note from the shop saying that the vehicle’s current muffler assembly “is rusted and leaks; will fail VSI (a.k.a. Vermont State Inspection).” The note is a bit of a scare tactic, which would otherwise render the car illegal to drive and register in Vermont.

The thing is, Vermont accepts repair jobs as long as the repair is as good as, or if not better than, OEM. A complete muffler replacement might not have been necessary in the first place if the muffler was damaged.

TikTok – mainly_mechanics

Parts and Labor ≠ $1,264.40

According to mainly_mechanics, the cost of a new muffler, if it were purchased by him as a business, would come out to $157 dollars. If the customer would like to purchase the part himself, the amount would go up by about ten bucks, and if the customer were to get the part through a retailer, it would total almost $300. Nowhere in any of mainly_mechanic’s quotes did they get even remotely close to $1,200, even after accounting for labor.

Including parts and labor, plus the $17 gasket, the $4.24 set of nuts and bolts, and the $159.99 for 48 minutes of labor, we get $348.23. That’s about a third of the price that the other shop would have charged the customer. The thing is, mainly_mechanics didn’t state this number themselves because, based on their assessment of the vehicle, the customer didn’t even need to buy a new muffler.

TikTok – mainly_mechanics

Didn’t Even Need It

The main issue here isn’t just the price of the part, but the fact that the car didn’t even need it in the first place. Later in the video, mainly_mechanics then showed us the muffler that was supposed to be replaced. It was determined that the exhaust gasket and the bolts were the only things that needed replacing, as the leaks were coming from there.

Moving to the back of the car, there were no such leaks to speak of. There was some surface rust, but not enough that would punch a hole through the body of the muffler or any of the connecting pipes. If the customer went ahead and spent on just the gasket and the bolts, minus the labor, he would have come out about $21 bucks poorer, then maybe about a hundred bucks in labor for the simpler job, and the total might come out to around $150 more or less.

TikTok – mainly_mechanics

A Misunderstanding?

In defense of this “high-profile” shop, maybe the customer was given an initial diagnosis without a thorough underchassis inspection. Based on the available information on the post, it could have been an initial quote, which was there to give the customer an idea of just how expensive it could get. Now, if this shop actually conducted the inspection and then quoted the customer its price for the muffler replacement, then there’s a problem.

The car in question is also a mystery. There was no mention of a year, make, or model of the car, which doesn’t give us a clear picture of what prices to expect for replacement parts. With a list price of $284, though, according to mainly_mechanics, it also calls into question where the part is coming from, whether it’s from an OEM or aftermarket replacement manufacturer.

Mainly_mechanics didn’t go into detail about where he sourced the $157 replacement from. You could speculate that the part was an aftermarket OEM replacement, while the part that the “high-profile” shop was selling was from the manufacturer, which could explain the high cost, somewhat (not really). Aftermarket or third-party replacement parts are designed to deliver similar performance to the OEM part that they replace, though there is a difference in price and quality, which is noted by the Federal Trade Commission.

Still, a $900-plus profit does sound criminal, but a quote is not a charge. I’d make an issue if that “high-profile” shop ended up charging the customer, but it’s a good thing he managed to shop around before bringing out his wallet. I guess the lesson here is to be aware of your vehicle’s issue and make sure that the shop handling it does its due diligence by properly inspecting your vehicle and showing you what’s wrong with it before any quote is given.

TikTok – mainly_mechanics

Honda Killed This Electric SUV, but a New U.S. Patent Looks Just Like It

The Patent Lives On

Given the slowing demand for electric vehicles in the U.S., it comes as no surprise that Honda canceled three EVs planned for North America. The brand’s first mass-market EV in the region, the Prologue, is also being discontinued after just over two years on the market. Among the canceled models was the 0 SUV, which was intended to rival the Tesla Model Y. However, a newly granted U.S. design patent appears to bring the canceled SUV back to life, at least on paper.

The patent, first spotted by CarMoses, includes several drawings depicting what appears to be the 0 SUV prototype from different angles. The prototype was unveiled at CES 2025 in Las Vegas, Nevada, alongside the 0 Saloon prototype. Both were later canceled, along with the Acura RSX, completing the trio of EVs that never made it to production.

Honda 0 SUV Concept

Honda

Spot the Difference

Looking at the patent drawings, the side profile closely matches that of the 0 SUV prototype, particularly the rear quarter window between the C- and D-pillars. This design element is absent from the 0 Alpha, the smallest model unveiled in the 0 Series lineup. The 0 Alpha also features rear door handles integrated into the C-pillars, similar to the Honda HR-V and Toyota C-HR, helping create a coupe-like appearance. In contrast, the patent drawings show conventionally positioned door handles, matching those of the 0 SUV prototype.

The pixel-like headlights of the 0 SUV prototype also appear to be reflected in the patent drawings. Another matching design element is the front bumper, which features a prominent horizontal black trim piece and a sportier appearance than the one on the 0 Alpha.

Apart from those details, the patent could resemble either the 0 SUV or 0 Alpha prototype. Both share a similar boxy shape with a sloping roofline and pronounced wheel arches. Mentioning the 0 Alpha here is relevant, given that Honda hasn’t canceled it. However, it is primarily intended for Japan and India.

Honda 0 Alpha Concept

Honda

Not Every Patent Hits the Road

But again, these comparisons are based on visual cues only, so nothing is confirmed. Automakers often patent vehicle designs to protect their styling from competitors or preserve them for future use. After all, quirky, boxy shapes seem to be the go-to these days, as seen with the latest generations of the Hyundai Santa Fe and Lexus GX.

Honda’s focus in North America is now shifting toward hybrids, including the next-generation CR-V Hybrid, whose production was reportedly delayed by about three months to April 2027. The automaker plans to introduce 15 next-gen hybrid models globally by 2030, primarily targeting North America.

USPTO


View the 3 images of this gallery on the
original article

Remember the Toyota Avalon? This Is It Now

Other Markets, Different Demand

The differences between automotive markets are interesting; some regions require certain cars in segments that don’t sell well elsewhere. In other cases, brands repurpose and revive nameplates they no longer use to enter a segment they want to compete in.

That’s the case for one of Toyota’s most recognized models that had a long run but was recently killed off. The Avalon used to be a staple in Toyota’s lineup, but made way for the Crown’s entry in the U.S.; however, in China, the Avalon lives on and is getting a new model too.

autohome


View the 3 images of this gallery on the
original article

China Avalon

Autohome reports it learned from official brand sources that the new Toyota Avalon for China will launch on November 5. The new Avalon will feature exterior and interior upgrades and offer both gasoline and hybrid variants.

On the outside, the first major change is the redesigned front grille, now featuring vertical chrome slats as the main design element. Above that grille is the now-iconic Toyota C-shaped headlight cluster we see on the Crown and the Camry, to which the Avalon is closely related. Size-wise, the new Avalon measures 4,990 mm (length), 1,850 mm (width), and 1,440 mm (height), with a wheelbase of 2,870 mm. The rims now feature a new design, while the rear lighting cluster sets the Avalon apart from its Toyota sedan siblings with its own distinct pattern and layout.

autohome


View the 3 images of this gallery on the
original article

Premium Inside

The Avalon was always supposed to be an elevated Camry, bridging the gap between that model and the higher Lexus cars. That’s evident in the new Avalon’s interior, which features a wraparound design with a large infotainment screen, a HUD, and crystal trim that contrasts with the subtle two-tone piping on the seats and steering wheel. It also has other notable features like heated and ventilated seats, massaging functions for the front passengers, and an in-car fragrance system.

In terms of the powertrain, the Avalon will be offered with either a 2.0-liter gasoline engine that makes 170 hp, which is the same as the current Avalon, or a 2.5-liter gasoline-hybrid system that makes a combined 230 hp. The 2.0-liter gets a normal CVT, while the hybrid gets a specialized e-CVT.

autohome

Corvette SUV and Electric Sports Car Plans Reportedly Shelved

Rethinking The Corvette’s Next Chapter

The electric vehicle market had strong momentum at the start of this decade, with Ford even expanding the Mustang lineup with an EV spin-off called the Mustang Mach-E. Reports also suggest that Chevrolet once considered expanding the Corvette lineup with two new all-electric models, an SUV and a two-door sports car. But apparently, the automaker may have already shelved those plans.

According to GM Authority, plans for the SUV, internally codenamed V224, and the two-door EV, codenamed V284, have been put on hold. A fastback spin-off was also reportedly in the works, though the publication is less certain about its existence. These vehicles were initially expected to launch between 2025 and 2026, but with this year nearing its end, none have materialized so far.

Chevrolet

Meeting a Tougher Market

The report also didn’t offer an explanation for why GM reportedly shelved the potential expansion. But given the slowing demand for EVs, especially in the U.S., these models could face less favorable market conditions. The Corvette SUV may be worth looking at, as this type of vehicle continues to see sustained demand. If the SUV version takes off, it could potentially generate revenue to support the Corvette lineup and further expansion plans. Lamborghini demonstrates this lineup dynamic with the Urus, which continues to be its best-selling model over its traditional supercar offerings. However, an all-electric powertrain could introduce additional uncertainties.

In fact, in the third quarter of this year, GM’s EV sales declined 62% compared to the same period last year. Sure, Q3 2025 saw a huge spike in sales as buyers rushed their EV purchases before the $7,500 federal EV tax credit expired, but slowing EV sales have also affected other brands. Ford even ended production of the all-electric F-150 Lightning, while Ram dropped plans for an all-electric 1500 in favor of a range-extended version.

What’s more interesting is that Corvette sales are up. The American sports car sold 6,585 units in Q3 2026, a 28.5% increase over the 5,123 units sold during the same period last year. This could tell the automaker that the current formula is working, and that now may not be the right time to commit resources to developing new models.

Chevrolet

GM Isn’t Giving Up on Electrification

However, these reports have not been confirmed by GM itself. One of the automaker’s latest electrification developments involves preparing its Lansing Delta Township Assembly plant for future hybrid production, which could help it capitalize on growing demand for hybrids in the U.S. The Corvette remains its sole hybrid offering with the Grand Sport X and the more extreme ZR1X, the latter capable of generating 1,250 horsepower.

To be fair, reports of the expansion plan date back to 2022, so jumping on the EV bandwagon may have been worth the risk at the time. Times are changing, and seeing the expansion plan reportedly shelved isn’t much of a surprise. However, Corvette chief engineer Tony Roma recently said that the nameplate will eventually go fully electric, but don’t expect it anytime soon.

Chevrolet


View the 3 images of this gallery on the
original article

Original Lamborghini Gallardo Designer Gives It a $1 Million Do-Over

A Familiar Supercar Gets Another Chapter

The Lamborghini Gallardo is still one of the most instantly recognizable shapes to ever roll out of Sant’Agata Bolognese. When it landed in the early 2000s, it gave Lamborghini a real shot at the modern supercar game, offering a more approachable, slightly less wallet-destroying alternative to the big, bad Murciélago. With its screaming naturally aspirated V10, razor-sharp looks, and compact stance, the Gallardo basically became the poster car for a whole generation of gearheads.

Now, almost thirty years after first dreaming up the Gallardo, its original creator is back for another spin. Meet the HOMMAGE 26, a full-blown reimagining cooked up by CAVËN Atelier and led by none other than Fabrizio Giugiaro through his GFG Style studio.

Giugiaro first penned the Gallardo at Italdesign back in 1998, but this time he gets to go wild – no pesky production rules or bean counters holding him back. HOMMAGE 26 also kicks off CAVËN Atelier’s Designer Series, which basically lets legendary designers go back and remix their own icons.

CAVËN Atelier

A New Look Without Losing Its Identity

The HOMMAGE 26 keeps some of that classic Gallardo DNA, especially up front. Giugiaro says the nose is pretty much straight from his 1998 vision, but the rear? That’s a whole new story. The end result is a mashup of old-school cues and modern touches, not some Frankenstein that forgets where it came from.

Surprisingly, barely anything from the original car survives. Only five parts make the cut: the roof, side windows, windshield, side mirrors, and their bases. Everything else? Brand new, including that slick carbon-fiber body.

Other wild touches include pop-down headlights (yes, down), active aero flaps, and a rear window you can actually open to show off the engine. These tweaks give the Gallardo a fresh vibe but keep its unmistakable silhouette intact.

CAVËN Atelier says the interior is getting a rethink too, but they’re keeping the details under wraps for now. Giugiaro calls the whole thing an evolution of an old idea, with some bits staying true to the past and others dragged into the present.

CAVËN Atelier


View the 2 images of this gallery on the
original article

A Manual V10 and Just 25 Examples

The mechanical side is just as spicy. The original 5.0-liter V10 sticks around, but Italtecnica has massaged it for more grunt. Now it screams up to 8,500 rpm and, yes, you get to row your own gears.

Buyers get two flavors: the GT with 540 horsepower, or the Performance version that bumps it up to 560. The chassis gets a two-mode suspension (comfort or sport), beefier brakes, and 20-inch wheels to round things out.

Only 25 HOMMAGE 26s will ever exist, each built from a first-gen Gallardo. You can bring your own donor car or let CAVËN Atelier hunt one down for you. The price? €900,000 (about $1 million at current exchange rates), and that’s before you even factor in the donor car or any extras. At least you’ll get dibs on whatever wild project comes next in the Designer Series.

CAVËN Atelier


View the 7 images of this gallery on the
original article

GM Recalls Six 2026 Traverse and Acadia SUVs Over Faulty Seat Welds

Not Everything Is Holding Together

General Motors recently announced plans to prepare its Lansing Delta Township Assembly plant in Michigan for hybrid vehicle production, signaling a shift from its heavy focus on EVs. While the move could help the automaker better navigate the U.S. market in the years ahead, the plant has a more immediate problem to address: six vehicles it produced are being recalled over improperly welded seats.

The affected vehicles include three MY2026 GMC Acadias and three MY2026 Chevrolet Traverses. Four vehicles are being recalled in the U.S. under NHTSA recall number 26V696, while the remaining two are covered by a recall in Canada. Because the front seats in these vehicles may be improperly welded, they might not provide adequate support during a crash, increasing the risk of injury, even when occupants are wearing seatbelts.

GMC

Weak Link

According to NHTSA, the defect was discovered after the driver’s seatback frame in a 2026 Chevy Traverse was replaced in July 2026. GM’s supplier subsequently reviewed laser-welding data from more than 94,000 seat components and identified six additional suspect parts, all manufactured on November 3, 2025. The problem stemmed from insufficient welds, also known as cold welds.

The safety agency noted that GM is not aware of any accidents or injuries related to the issue. The supplier has since revised its maintenance schedule and improved its weld inspection procedures to prevent similar defects from occurring.

As part of the remedy, affected owners will be advised to take their three-row midsize crossovers to dealerships for a seatback frame replacement, free of charge. Some affected vehicles have the problem with the driver’s seat, while others have it with the front passenger seat. NHTSA said that all covered vehicles are still under warranty, so a separate reimbursement program will not be offered.

Chevrolet

Getting Back Into Shape

GM will begin notifying affected U.S. owners on December 7, while VINs are already searchable in the recall database.

The Traverse and Acadia share GM’s C1 platform with the Buick Enclave, and all three are powered by a 2.5-liter turbocharged inline-four producing 328 horsepower and 326 lb-ft of torque. With all three crossovers built at Lansing Delta Township Assembly, the plant’s upcoming shift toward hybrid production raises the possibility that these nameplates could be among the first to receive hybrid powertrains. However, the automaker has yet to confirm which models will be electrified first, leaving the Chevrolet Corvette as its sole hybrid offering stateside.

GMC


View the 3 images of this gallery on the
original article

Winter Storm Warning: Up to 18 Inches of Snow and 50 MPH Gusts Slam the West

Up to 18 inches of snow is forecast above 10,000 feet under winter storm warnings from the National Weather Service, with the first warning beginning at 8 a.m. ET Sunday and gusts reaching 50 mph. Forecasters say travel could become very difficult to impossible in blowing and drifting snow, and the warnings hold until 1 p.m. and 2 p.m. ET Monday, past the Monday morning commute.

Snow Totals And Timing

The NWS Grand Junction winter storm warning for the northwest and southwest San Juan Mountains is already in effect and runs until 2 p.m. ET Monday. It calls for 12 to 18 inches above 10,000 feet, with locally higher amounts and gusts to 45 mph. The office upgraded it from a winter storm watch on Saturday morning. Telluride, Ouray, Silverton, Lake City, Rico and Hesperus are inside it, along with Red Mountain, Molas, Coal Bank and Lizard Head passes.

Farther east, NWS Pueblo has the eastern San Juan Mountains above 10,000 feet under a warning from 7 p.m. ET Sunday to 1 p.m. ET Monday, covering Wolf Creek Pass and Cumbres Pass. It forecasts 8 to 14 inches and the strongest wind of the storm, with gusts to 50 mph that could produce areas of blowing and drifting snow. Pueblo expects the worst travel Sunday night and Monday morning.

Colorado is not the only state on the alert map this weekend. NWS offices also have winter alerts posted in Utah, Wyoming, Idaho, Nevada and California, including a winter storm warning for the Ruby Mountains in Nevada.

Driving Down Wolf Creek Pass: Low Gear On A 7 Percent, 8-Mile Grade

Wolf Creek Pass carries US 160 over the eastern San Juans. According to the Colorado Department of Transportation, the road drops at a 7 percent grade for more than eight miles from the summit, with a hairpin curve six and a half miles down and two runaway truck ramps along the way.

CDOT’s Wolf Creek guidance for truck drivers advises checking the brakes before descending, maintaining a low speed in a low gear, and not riding the brakes, which can cause overheating. The summit’s wide shoulder doubles as a chain-up area for traffic in both directions.

Related: Honda Odyssey Has a Snow Mode, but Can It Really Replace AWD?

Red Mountain Pass: Avalanche Control Means Road Closures

On US 550, Red Mountain Pass runs below avalanche terrain. In 2023 CDOT installed remote avalanche control systems at slide paths on the pass, two Gazex units and three O’bellx units that use compressed air and gases to trigger controlled avalanches above the road while it is closed. CDOT says crews can run that work in the early morning, before commuter traffic builds, and that the systems shorten closures.

Across the state, CDOT and the Colorado Avalanche Information Center monitor 522 avalanche paths above state highways and I-70, with active mitigation on 278 of them. Colorado’s road conditions are on COtrip and through 511.

What If Your Car’s Brakes Fail? Bosch Has a Touchscreen Solution

What If Your Electronic Brakes Fail?

Brake-by-wire isn’t some sci-fi fantasy anymore. It’s already here, with plenty of new cars ditching old-school cables and rods for sensors, computers, and electronic gizmos. Instead of a direct link between your foot and the brakes, the car now reads your pedal press and decides how hard to clamp down –  all through electronics.

However, this approach also raises an important question: What happens when the electronics responsible for stopping your car fail?

Bosch thinks it has a solution. The company just filed a patent for a backup braking system that steps in when the main electronics go on vacation. Basically, it’s an extra safety net that could let you bring your car to a stop even if the usual tech throws in the towel.

CarMoses

Bosch’s Backup Plan Includes a Touchscreen Button

First spotted by CarMoses, the patent describes a system that uses three separate control units. The first and second handle the vehicle’s regular braking operations, while the third continuously monitors them for potential failures.

If the third control unit detects that either of the other units has malfunctioned, it can activate an emergency braking function. It can also notify the driver through visual, audible, or haptic warnings.

What’s particularly interesting is how Bosch proposes allowing the driver to request braking. Rather than relying exclusively on a conventional brake pedal, the system could provide an emergency button through the vehicle’s infotainment touchscreen. Another proposed implementation places the control directly on the steering wheel, where it’s easier to reach without taking your hands off the wheel.

You might even get to control how hard you stop – hold the button for more braking, tap for less. Bosch says you could ease into a stop instead of slamming to a halt, which sounds nice in theory.

This makes the concept different from a conventional automatic emergency braking system, which generally intervenes to avoid or mitigate a collision. Bosch’s proposal instead focuses on giving drivers an alternative braking interface when the regular electronic controls become unavailable.

CarMoses

Could This Actually Appear in Production Cars?

With more brands jumping on the brake-by-wire bandwagon, having a backup brain and a new way to hit the brakes could be a smart move if the electronics ever flake out.

But let’s be real: in a panic, hunting for a virtual brake button on a screen sounds like a recipe for chaos. A button on the steering wheel might make more sense, but it’s still a far cry from stomping on a pedal. For now, this is just a patent, not a promise. Like plenty of wild ideas before it, there’s no guarantee it’ll ever make it into your next car.

German IPO


View the 2 images of this gallery on the
original article

Cadillac Made a Blacked-Out Escalade America Isn’t Getting

One of the Few in Japan

American cars aren’t a big deal in Japan, although some models are sold there; the appeal is mostly in niche products like Jeeps or sports cars like the Corvette. Another niche segment that one American car maker competes in is luxury, and you already know that’s Cadillac.

For those who don’t know, America’s definition of premium SUV mobility, the Cadillac Escalade, is actually sold in Japan. More recently, Cadillac Japan announced a special edition that will be sold only in its local market.

Cadillac

Noir Edition

Just launched by General Motors Japan, with its President and CEO, Itaru Wakamatsu, is the special edition, Cadillac Escalade Noir Edition. As we know, Noir means black, and that’s the overall theme of this Escalade, turning it into a stealthy, menacing SUV. Its main exterior detail is the matte black XPEL Stealth PPF, which the brand claims gives it an elegant sheen. Since it’s PPF, the whole thing is scratch-resistant and easy to maintain. Cadillac also added XPEL’s patented PPF on the hood, body sides, and rear tailgate.

Other exterior panels, like the front grille, were finished in gloss black to contrast the flatter shine of the matte panels. The exterior also features a new 22-inch 18-spoke rim design finished in midnight aluminum. Cadillac says the overall exterior finish exudes strength and beauty. Inside, the Escalade continues the blacked-out motif but adds a contrasting wood-grain panel. The interior includes exclusive Noir Edition trims and features, like an exclusive “ornament” on the passenger side. It also has Noir Edition floor mats, with a limited-edition nameplate and silver-colored piping.

Cadillac

Familiar Performance

The Cadillac Escalade Noir Edition is now available in Japanese dealerships for 21,000,000 Japanese Yen ($133,000). It will also be limited to just 20 units, making it truly special.

The Noir Edition remains basically the same in performance and features. The Escalade in Japan still rides on the brand’s Air Ride Adaptive Suspension, Magnetic Ride Control, and GM’s much-loved 6.2-liter V8 engine. The Escalade still has the massive 55-inch curved LED display, AKG in-car surround system, and the tablet-sized command center.

Cadillac

Dodge Viper’s Old Factory Is Now Home to a Car Design Podcast

The Science of Looking Good

Car designs do more than make vehicles look good. They help establish a brand’s identity and can even attract buyers. Stellantis wants to shed light on automotive design with a new podcast in which Chief Design Officer Ralph Gilles will explore the design and creative processes behind vehicles through conversations with designers, engineers, executives, and creators.

Gilles joined the company as a designer in 1992 and has held various positions since, including president and CEO of the Dodge brand. He notably led the design of the Chrysler 300, which gave the automaker a luxurious-looking sedan and earned it the nickname “poor man’s Bentley.” The podcast is recorded at the former Conner Avenue Assembly Plant in Detroit, where Dodge previously manufactured the Viper, another iconic design known for its low-slung silhouette and long hood housing a large-displacement V10 engine.

Stellantis

Turning Sketches Into Stories

Dubbed “Car Concepts with Ralph Gilles,” the podcast aims to cater to different audiences, including car enthusiasts, students, design enthusiasts, and business leaders. Based on the press release, the podcast is intended to explore the human side of automotive development rather than serve as a platform for announcing new models.

For the first season, the guest list includes former Chrysler executive Bob Lutz, automotive personality Cristy Lee, content creator Garrett Reed, and Stellantis designers Scott Krugger and Gilles Vidal. The latter recently presented six concept cars ahead of the Paris Motor Show, including the quirky-looking Fiat Multiplay, which combines elements of a pickup, SUV, and MPV.

Retired Mercedes-Benz design chief Gorden Wagener will also be among the guests, potentially offering insights into luxury-car design, which involves different priorities than designing mass-market vehicles. His participation is particularly interesting given Chrysler’s traditional focus on mainstream buyers, while Maserati serves as Stellantis’ primary luxury brand.

Chrysler

The Weekly Design Pit Stop

“Car Concepts with Ralph Gilles” is available in video format on the Stellantis North America YouTube channel, with heritage and new vehicles providing the backdrop for each conversation. Audio versions are also available on Spotify, Apple Podcasts, Amazon Music, YouTube, and Audible. The nine-episode first season kicked off on October 29, with new episodes released every Thursday.

For reference, Stellantis owns 14 automotive brands, including Abarth, Alfa Romeo, Chrysler, Citroën, Dodge, DS Automobiles, Fiat, Jeep, Lancia, Maserati, Opel, Peugeot, Ram, and Vauxhall. With such a diverse portfolio, the podcast has plenty of potential topics to explore. This variety could also help attract a broader audience of automotive enthusiasts.

Dodge


View the 3 images of this gallery on the
original article